PLA Silky Rainbow Filament daabacaha 3D Filament
Tilmaamid
• Qurux badan, oogada dhalaalaysa.
• Dusha dhalaalaysa iyo qaab siman oo xariir u eg.
• 100% bio-degradable iyo badbaadada cuntada ee FDA waa la oggolaaday.
• Heerka hoos u dhaca walxaha, dhexroor isku mid ah.
• Si fiican u duub, si fiican u milan, u quudi si isku mid ah oo joogto ah iyada oo aan la xidhin tuubada ama tuubada.
Tilmaamaha Alaabta
| Summada | Torwell |
| Qalab | Isku-dhafka polymer ee Pearlescent PLA (NatureWorks 4032D) |
| Dhexroorka | 1.75mm/2.85mm/3.0mm |
| Miisaanka saafiga ah | 1 Kg/spool;250g/spool;500g/spool;3kg/spool;5kg/spool;10kg/spool |
| Miisaanka guud | 1.2kg/spool |
| Dulqaad | ± 0.03mm |
| Dhererka | 1.75mm (1kg) = 325m |
| Deegaanka Kaydinta | Qalalan oo hawo la siiyee |
| Dejinta qalajinta | 55˚C ilaa 6 saacadood |
| Qalabka taageerada | Ka codso Torwell HIPS, Torwell PVA |
| Ansixinta Shahaadada | CE, MSDS, Gaadhsiin, FDA, TUV iyo SGS |
| La jaanqaadi kara | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker iyo wax kasta oo kale oo FDM 3D daabacayaasha |
| Xidhmada | 1kg/spool;8spools/ctn ama 10spools/ctnbac xiran oo leh qallajiyeyaasha |
Bandhiga Model
Xarunta Warshada
Talooyin Daabacaadda
1).U hubso inaad hagaajiso fiilaha fiilada ka dib isticmaalka wakhti kasta, sida geli dhamaadka fiilaha ee daloolka si aad uga fogaato in fiilaha la qalloobo isticmaalka xiga.
2).Si aad u kordhiso nolosha Filamentigaaga, fadlan ku kaydi bac engegan, xidhan ama sanduuq
| Cufnaanta | 1.21 g/cm3 |
| Tusaha socodka dhalaalka (g/10min) | 4.7 (190 ℃/2.16kg) |
| Heerkulka Kulaylka Qallooca | 52 ℃, 0.45MPa |
| Xoogga Jilicsan | 72 MPa |
| Kordhinta xilliga Nasashada | 14.5% |
| Xoog Jilicsan | 65 MPa |
| Modulus Flexural | 1520 MPa |
| Xooga Saamaynta IZOD | 5.8kJ/㎡ |
| Waarta | 4/10 |
| Daabacaadda | 9/10 |
| Heerkulka ka baxsan (℃) | 190 - 230 ℃lagu taliyay 215 ℃ |
| Heerkulka sariirta (℃) | 45 - 65°C |
| Cabbirka Dhuunta | ≥0.4mm |
| Xawaaraha taageeraha | 100% |
| Xawaaraha Daabacaadda | 40 - 100mm/s |
| Sariir Kulul | Ikhtiyaari |
| Dusha sare ee la dhiso ee lagu taliyay | Muraayad leh xabag, warqad waji-xidhka, Cajalad buluug ah, BuilTak, PEI |
Halkan ku qor fariintaada oo noo soo dir
